WINertiaAV™
PRODUCT OVERVIEW
| Optimation Testing |
 |
| See videos of our Optimation testing of the WINertia AV vs. current roller technologies |
The problem of air entrainment between the idler and the web can be costly.
Unfortunately, so can the usual solutions. But not anymore. The innovative
WINertia AV™ eliminates trapped air, along with scratching, slipping,
bunching and side movement in a more effective and less costly roll
solution than the traditional spiral groove. And the WINertia AV™ gets the air out 7.5 times faster and has 15 times the air parking capacity.
Stop wasting product or spending resources on obsolete solutions. Make the
switch to the quiet, cost-effective WINertia AV™. And get on the roll to
increased profitability.
View the latest, expanded content Winertia AV™ Technote.
PRECISION SPECIFICATIONS
Available in the following sizes:
2.5 x 2, 3 x 2, 3.5 x 3, 4 x 3, 5 x 3, 6 x 3, 8 x 3
| 2.5 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
2.360/2.300" |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock bore |
| Bearing Sizes Available |
.75, 1.0, 1.25, or 25mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.4995/1.4985) |
| No End Cap Included |
| Approximate weight |
1.17 lbs/ft |
| Available Coatings |
Anodize, Black Hard Coat, Teflon Hard Coat |
| |
 |
| 3 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
3.100/3.060" |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock bore |
| Bearing Sizes Available |
.75, 1.0, 1.25, or 25mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.4995/1.4985) |
| No End Cap Included |
| Approximate weight |
2.27 lbs/ft |
| Available Coatings |
Anodize, Black Hard Coat, Teflon Hard Coat |
| |
|
| 3.5 x 3 Precision Roll Specifications |
| Finished Roll Diameter |
3.550/3.485" |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Surface Finish |
32 ra |
| Bore Available |
Standard |
| Bearing Sizes Available |
1.5", 2.0", 40mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.4995/1.4985) |
| No End Cap Included |
| Approximate weight |
.200 Pounds Per Inch (without shaft and bearings) |
| Available Coatings |
Anodize, Black Hard Coat, Teflon Hard Coat |
| |
|
| 4 x 3 Precision Roll Specifications |
| Finished Roll Diameter |
4.150/4.100" |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Bearing Sizes Available |
1.5", 2.0", 40mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.5” = 1.4995/1.4985) |
| Serialized End Caps Included |
| Approximate weight |
.406 Pounds Per Inch (Without shaft and bearings) |
| Available Coatings |
Anodize, Hard Coat, Teflon Hard Coat |
| |
|
| 5 x 3 Precision Roll Specifications |
| Finished Roll Diameter |
5.50/4.9705" |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Bearing Sizes Available |
1.5", 2.0", 40mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.4995/1.4985) |
| Serialized End Caps Included |
| Approximate weight |
.556 Pounds Per Inch (without shaft and bearings) |
| Available Coatings |
Anodize, Black Hard Coat, Teflon Hard Coat |
| |
|
| 6 x 3 Precision Roll Specifications |
| Finished Roll Diameter |
6.100/6.050 |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Bearing Sizes Available |
1.5", 2.0", 40mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.5” = 1.4995/1.4985) |
| Serialized End Caps Included |
| Approximate weight |
.693 Pounds Per Inch (Without shaft and bearings) |
| Available Coatings |
Anodize, Hard Coat, Teflon Hard Coat |
| |
|
| 8 x 3 AV-60 Precision Roll Specifications (Uses 7.5 x 3 tubing for headers) |
| Finished Roll Diameter |
8.225 / 8.075 |
| Total Indicator Run Out (TIR) |
.0005 Per Foot (.002 Min) |
| Survace Finish |
16 ra, 32 ra, 64 ra, or 125 ra |
| Bore Available |
WINlock Bore |
| Bearing Sizes Available |
1.5", 2.0", 40mm |
| Bearing Type |
ER, Free Spin, Set Screw Locking |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.5” = 1.4995/1.4985) |
| Serialized End Caps Included |
| Approximate weight |
.827 Pounds Per Inch (Without shaft and bearings) |
| Available Coatings |
Clear Anodize, natural Hard Coat, Black Hard Coat, or Teflon Hard Coat |
| |
|