WINertiaTQ™
PRODUCT OVERVIEW
The WINertia™ idler built with our new torque coupling makes live shafts more affordable and easier to install. The coupling not only facilitates installation and reduces labor, but it also allows you to make shaft replacements without buying an entire idler roll. Our WINertia™ Torque Coupling idler delivers the productivity you need in challenging environments.
PRECISION SPECIFICATIONS
Available in the following sizes:
2.5 x 2 • 3 x 2 Lite • 3.1 x 2 • 4 x 2 • 5 x 2 • 6 x 2
| 2.5 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
2.500/2.400” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| No End Cap Included |
| Approximate weight |
.165 Pounds Per Inch (without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
 |
| 3 x 2 Lite Precision Roll Specifications |
| Finished Roll Diameter |
3.060/3.020” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Serialized End Caps Included |
| Approximate weight |
.186 Pounds Per Inch (without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
|
| 3.1 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
3.175/3.075” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
16 ra, 32 ra, 64ra, or 125 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Serialized End Caps Included |
| Approximate weight |
.261 Pounds Per Inch (Without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
|
| 4 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
4.070/3.95” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Serialized End Caps Included |
| Approximate weight |
.303
Pounds Per Inch (Without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
|
| 5 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
5.080/4.940” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Serialized End Caps Included |
| Approximate weight |
.446 Pounds Per Inch (Without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
|
| 6 x 2 Precision Roll Specifications |
| Finished Roll Diameter |
6.050/5.940” |
| Total Indicator Run Out (TIR) |
.00075 Per Foot (.003 Min) |
| Surface Finish |
32 ra |
| Bore Available |
WINlock |
| Shaft Sizes Available |
1.0 or 25mm |
| Shaft Diameter Tolerance |
-.0005 / -.0015 (Ex: 1.0” = .9995/.9985) |
| Torque on Coupling |
50 FT\LBS |
| Balanced to Spec G6.3 |
1500 FPM (or as specified) |
| Serialized End Caps Included |
| Approximate weight |
.55 Pounds Per Inch (Without shaft or Torque Coupling) |
| Available Coatings |
Clear Anodize or Black Hard Coat |
| |
|